Samsung J1 or J100H/DD full flashing guide. The Process com.android phone has stopped solution

Samsung J1 or J100H/DD full flashing guide. The Process com.android phone has stopped solution in order to provide a fast booting speed, but the result was not good as some models fail after 24 hours of constant usage

In this video you are watching the process to solve the com.android phone has stopped of Samsung J1

Tools and files required

Latest Binary Firmware

Odin Tool

Samsung USB Driver

Steps to follow

1. At first open the battery and check battery voltage if less than 40 percent then charge and insert it to phone
2. Remove all SIM and Micro SD cards present in Mobile
3. Press and Hold Volume Down, Home Key and Power Key together for 5 to 8 seconds
4. Now press Volume Up Button
5. Check for Binary Version of software
6. Download and install Samsung Driver to your PC
7. Download the latest software and Odin Tool for flashing
8. Connect USB cable to Phone and PC
9. Right click on Odin Tool and run as Administrator
10. Check for Comport Showing or not
11. Select AP option and add file from the downloaded firmware folder
12. Wait for few minutes
13. Now simply press on Start Button
14. Wait for flashing to complete
15. Check for PASS result shown on Odin Tool